18+

To view this site you must be 18 years of age or older

Yes, I am 18 or older No, I am under 18

This website uses cookies, by continuing to use our site you are agreeing to our cookie policy

asMODus - Minikin 2 180W Touch Screen Box Mod ASMOMINV2

  • Ready for dispatch

asMODus Minikin V2. 180w box mod with touch screen.

Available in various colours

Add to Enquiry
  • Description

    asMODus - Minikin 2 180W Touch Screen Box Mod

    ASMOMINV2

    The Minikin is back the all new Minikin 2! The Minikin 2 is powered by a GX-180-HT/UT which incorporates the same battery power saving capabilities as its predecessors but features a new wattage cap of 180 watts and touch screen support!

    The Minikin 2 utilizes newly updated firmware which displays the following information on its LED screen: Individual battery charge, resistance of the atomizers, volts being used to fire at desired wattage, a puff counter, the duration of the fire, and which mode you are in.

    The Minikin 2 features a redesigned body that was designed to be exceptionally comfortable to hold. The asMODus logo has been re-positioned to the back of the device and the USB port has been moved the front of the device as the battery door has been remodeled to add magnetic closure. 15 vent holes have been added to the base of the device which allows for maximized heat dissipation.

    Using the device

    Unlocking the touch screen is done by simply sliding your finger down the screen. Touching the wattage will allow you to change the wattage using the "+" and "-" buttons that appear on the screen. Pressing the fire button will set the wattage and take you back to the main screen. The menu of the device is accessed by pressing the firing mode when the screen is unlocked. Within the menu you can check the resistance, select a mode, and enter the set up.

    Checking resistance: Once in the main menu, clicking the "Res" button enters you into the resistance menu. On this screen you will see "Set Res" on the top and on the bottom you will see a "CHECK" button. By pressing the "CHECK" button , it will give you a resistance and "YES" and "NO" buttons will appear. Pressing "YES" will take you back to the main menu with your resistance set. Pressing "NO" will cause "+" and "-" buttons to appear which allow you to manually change your resistance. NOTE: The manual changing of resistance only applies when using a temperature control mode.

    Picking a mode: In the main menu, the 2nd option found is called "Mode". By pressing "Mode" you will enter a mode selection menu that allows you to choose which mode to fire the device in. You will see "PWR" which is your standard variable wattage mode and within that mode you will see two different options: "W" Power which is wattage mode, and a new mode called "Curve". "Curve" is a unique firing mode within traditional power mode that manually imitates the abilities of temperature control by setting 5 different wattage over time presets. For example you can set the device to fire at 80W for .5 seconds then 90W for 0.5 seconds then 75W for 0.5 seconds (for up to 5 different presets). Doing this will run through your presets in a cycle for an extremely fine tuned vaping experience. Wattage in "Curve" can be adjusted in 0.1 watt increments and seconds can be adjusted in .1 second increments. The other options found in the mode selection screen are "Coil" which is used to select which type of wire you are firing against (supports Ni200, SS316, SS317, and Ti), and then "TCR" and "TFR" modes.

    Using set up: The last option in the main menu is called "Set Up". In the "Set Up" menu you will see three different pictures. The first one (which looks like a light) controls the brightness of the screen. The screen can be adjusted on a scale of 1 - 10 based on user preference. The 2nd option (which looks like a piece of paper) is used to set a puff limit. This sets a maximum number of puffs that can be taken if you are trying to limit and monitor the amount that you vape. If you try to fire the device and have exceeded your maximum puffs, a warning symbol along with the text of "PUFF LIMIT" will display on the screen and the device will not fire. Setting the limit to 0000 will not set a maximum number of puffs but will still record the amount of puffs taken. The last option (which looks like a garage can) wipes your puffs so can have a fresh gauge of how much the device is being used.

    Technical Specifications:

    • Requires two 18650 sized batteries
    • Accommodates Attys and tanks up to 25mm
    • Touch screen type: Capacitive screen
    • Wattage range: 5.0 - 180.0W
    • Wattage range (TC Mode): 5.0 - 120.0W
    • Atomizer ohm range: 0.1 - 2.5 ohm
    • Max output voltage: 7.5V
    • Peek output current: 45A
    • Temperature control range: 212° - 572°F / 100°C - 300°C
    • Charging parameters: DC 5V/1A
    • Upgradeable system

    NOTE: Due to the sensitive materials used to create the special edition colors, such as chrome and gold, they are fingerprint and scratch magnets. Any aesthetic damages or imperfections are not covered under warranty.

  • Video

    Video

  • Reviews

    Reviews for asMODus - Minikin 2 180W Touch Screen Box Mod

    ASMOMINV2

    No reviews yet

    Write Your Review

     
     
  • Delivery & Returns

    Delivery & Returns

    Important Returns Notice

     

    Please read through the following information throughly. This is the most recent update to the Returns Policy here at BKS Tradeline LTD.

    If you have any questions or queries then please contact us either by email or call directly. 

     

    Thank you.

     

     

    BKS – E-Cigarette Returns:

     

    At BKS, in order to process returns we require the following: -

     

    Due to the increasing amount of non-faulty items being returned & the increasing amount of products being returned which have not been originally supplied by ourselves (Including a percentage of FAKE products). We operate a strict returns policy which must be adhered to.

     

    All products supplied by BKS Tradeline LTD are subject to a 90-Day returns policy. This means that in the first 90 days from date of purchase from us, you are free to return any goods that are found to be faulty from manufacturing defects as described below. These will be put through our normal returns system, If a product specifies that the warranty period is longer than 90 Days, you must contact us prior to returning goods to us so we can ensure they follow the correct protocol. Anything outside of this timeframe will not be able to be dealt with by us and we would recommend contacting the manufacturer directly.

     

     Firstly we ask you to do your best to resolve any issues you may have with the items in store, as many issues with e-cigarette kits arise from user error or requiring a simple change of coil.

    • An itemised list of items being returned including a description of the fault with each item.
    • Full packaging (including sleeves with serial numbers) including any components provided with the unit i.e charging cables (consumable items are exempt unless fault is present from D.O.P/ Unused condition).
    • Call/email to confirm there are items to be returned, this is our standard practice as we can also advise or assist on the phone.
    • If possible; a receipt for original date of sale, which is used to confirm if the device is within the manufacturers’ warranty period.
    • Check to see if the item is genuine, look and compare to a current item in your store. Some items are being purchased and switched with good imitation but still fake products which will not be accepted as a return. This is the case even if supplied back to us in authentic packaging.
    • Ensure the fault has not arisen from customer misuse. For example dry firing a coil is not covered.
    • Coils or consumable items are not covered as a whole simply due to the nature of the item.

     

    We aim to process all items within 1 week of receiving however during busy periods this may take a little longer. All returns will have a full resolution within 30 days. Any returns which are received which do not follow the above requirements will take longer to process due to needing more time or it could possibly mean we are unable to process the item. In this instance they will by default be returned to you on your next order.

     

    We endeavour to help where possible to get a full resolution but due to manufacturers policy we are limited to what can be offered.

     

    All items which are approved as faulty returns will be issued with an immediate credit note. This is to ensure you have full flexibility on how you can use it, either deduct the value off of your next order or give your customer the option to choose a different device rather than be issued with an exact replacement.

     

    Please ensure your customers are aware that they are responsible for keeping their device in good working order and any damages through their usage are not covered by manufacturers warranty.

     

    We cannot offer refunds on any items which fall into this category however if your in store refund policy is different, that is down to your own discretion.

     

    Unfortunately we are unable to offer free returns postage on faulty items as we already offer to cover and subsidise the courier fees on any qualifying orders.

     

     

     

    BKS – Headshop Returns:

     

    At BKS, any item which is considered to be of a headshop nature will be assessed on a case by case basis. This is discussed either by email or phone.

     

    If you have received an item which is faulty or broken – we may just request for it to be returned or discarded. A credit will be made in either case. For breakages, photographic evidence of any damages MUST be notified to us within 3 DAYS OF RECEIPT of the order. Any claims outside of this will be processed at our discretion, this is due to claiming funds back from the courier service – we have approximately 5 working days to make a claim and need time to also process it from our end.

    Again, any items of a consumable nature will not be covered due to the nature of the item.

     

    By placing any future orders you are agreeing to the above terms of business.

     

    We have checked with our local trading standards & if you are in doubt about the item being returned from your customer to you, you are quite within your rights to refuse a refund or exchange until items have been checked for authenticity / misuse / tampering etc. You can also advise your customer of this as have to be given a reasonable amount of time to carry out this investigation on your behalf.

     

    We hope you all understand our reasons for the above measures any questions by all means give us a call.

     

     

    None of the products are for use with any illegal substances. Any such use would be AGAINST THE LAW under the misuse of DRUGS ACT. Any items which have been contaminated with such substances are not authorised to be returned to us here at BKS. You *may* still be entitled to a refund however it is based on individual situation. Call us on 01206 868999 if you are unsure.

    Kind regards

    BKS TRADELINE LTD

     

     

     

     

     

     

    Sales Checklist - 

     

    Explain to your customer how to use their new purchase; this will cause fewer problems for both you & us.

     

    Explain how using a better quality liquid will benefit them and how the VG/PG ratio will affect their tank, i.e. a 50/50 will be thinner and may possibly cause leaking/seeping in some tank designs.

     

    When it comes to charging, explain what they can and cannot use to charge them with. We often hear of high output chargers such as mobile phone chargers being used. This can cause damage to the electrical devices.

     

    NEVER leave your Mod on charge overnight.

     

    Explain that the coils are disposable and that they will need replacing on a regular basis. The lifespan of a coil varies hugely depending on usage, the type of liquid, duration of vaping and the settings on which the device is used. Make sure you are supplying the correct replacement coils, supplying 0.25 ohm coils to a mouth to lung vaper is not an ideal move!

    Clarify it is essential to prime coils prior to use.

     

    Never exceed the maximum power output for their tank / coil.

    Never use a nickel coil in a non T/C mod.

    Never use a kanthal coil in a T/C mod when T/C in enabled.

    Never incorrectly insert a battery.

    Never leave a loose battery in your pocket with keys, coins etc.

     

    Always replace a damaged battery, even if it only has minor damage to the casing.

     

    Offer to tailor their vaping either with the use of an alternate drip tip with a different bore or material and of course select the right mg of liquid for the customer. There are hundreds of flavour profiles to suit any one whether they are new or a veteran vaper.

     

     

    Advise customers to read the instructions in addition to informing them of the above information.

     

     

     

    Mech Mods & RDA’s are for experienced users only (Those with an understanding of the ohms Law and who are competent vape builders).

     

     

    If you need help or advice please contact us we are here to help. Read up on your products & / or check out YouTube for further assistance.

  • Secure Checkout

    All orders are sent directly to our internal invoicing system where they will be picked & packed before a final invoice is sent directly to you.

  • 100% No Clone Zone

    We only sell 100% genuine products direct from the manufacturer. You will not find any clones here!

  • Super Fast Shipping

    All orders will be completed and ready to ship within 24 hours (Subject to payment). All deliveries are sent via DPD next day for a super fast service!

  • Expert Customer Service

    If you have any questions or queries please feel free to call us on 01206 868999 or send an enquiry and someone will be sure to help you out!